<< Choose your vehicle
 

SELECTIONS: Products : Synergy Suspension : Suspension Lift Kits : Synergy Suspension : Synergy Suspension Products

  SYN3402C
Bump Stop Can Mount
Our Price: $35.00

Bump Stop Can Mount...



  SYN3404
Bump Stop Can Mount
Our Price: $35.00

Bump Stop Can Mount...



  SYN3405
Synergy 2.0" Air Bump Can, Single Pinch Bolt (DOM)
Our Price: $35.00

* Air Bump Mounting Can
* Fits Bilstein, Fox, and SAW 2.0 Air Bumps
* Available in 1026 DOM
* Machined ID to allow for welding the can between frame rails or tube...



  SYN3403
Synergy 2.0" Air Bump Can, Tall w/ Single Pinch Bolt (DOM)
Our Price: $34.99

* Air Bump Mounting Can
* Fits Bilstein, Fox, and SAW 2.0 Air Bumps
* Made from 1026 DOM
* Designed for applications where our standard bump cans are too short...



  SYN3121
Synergy Bump Stop Axle Pad
Our Price: $10.00

* Bump Stop Pad, across tube mounting position
* Designed specifically for hydraulic air bump stops, can also be used with rubber or polyurethane bump stops
* Brackets are laser cut and CNC bent form 1/4" high strength carbon steel
* 3 1/2" x 4 1/2" bump stop contact patch
* Designed for 3" axle tubes
* Sold individually...



  SYN3620-07-14-10
Synergy Double Adjuster Tube Adapters - 0.875" -14 Left Hand Thread, 1.000" ID Tube
Our Price: $45.00

Synergy Suspension Double Adjuster Tube Adapter

* The Synergy Suspension Double Adjuster Tube Adapter is designed to eliminate the need for jam nuts that are normally used when building link suspension & steering systems
* The use of the Double Adjuster allows the suspension/steering link to be adjusted without removal
* The Double Adjuster allows the user to fine-tune the suspension/steering geometry by loosening the pinch bolt and turning the adjuster...



  SYN4024
Synergy Jeep JK 2 Gallon Compressor Mount (Viair)
Our Price: $55.00

* Designed for mounting 2 Gallon air compressor tank between the radiator and engine
* Powder coat finish for maximum corrosion resistance
* Kit contains 2 brackets and all mounting hardware...



  SYN5801
Synergy Jeep JK 2/4DR Front Grab Handle Set (2 Handles)
Our Price: $65.00

* Synergy Suspension Jeep JK, TJ, LJ, YJ Grab Handles
* Manufactured from high quality 1.0" X .083" DOM tubing
* Powder coat finish eliminates corrosion that can occur under extreme element
* Includes all hardware necessary for a quick and easy installation
* Compatible with both hard and soft tops

Includes:

* (2) Handles
* (2) J-Hook Mounts (Front only)
...



  SYN8012-03
Synergy Jeep JK Dana 30/35/44 Lower Control Arm Skid
Our Price: $35.00

* Jeep JK Dana 30/35/44 Lower Control Arm Skid Plate
* Designed to be welded on the front or rear Jeep JK lower control arm mounts
* Brackets are laser cut and CNC bent from 1/4" high strength carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Sold in pairs...



  SYN8012-02
Synergy Jeep JK Front Dana 30/44 Inner C Gusset Kit - 2.5" Axle
Our Price: $65.00

* Synergy Suspension Jeep JK Dana 30/44 Inner C Upper & Lower Gusset Kit
* Designed to be welded to the front C-Yokes of the Jeep JK Dana 30 or 44 axle
* Brackets are laser cut and CNC bent from 1/4" high strength carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* 1 Kit will fit a complete front axle

Kit...



  SYN8055
Synergy Jeep JK Front Track Bar Bracket
Our Price: $125.00

* Compatible with 3.0" and taller lifts
* Heavy duty front track bar bracket for the Jeep JK
* This bracket raises the vehicles suspension roll center by 3.0"
* Special bolt-on design strengthens the factory mount that is prone to failure
* Raising the roll center reduces vehicle body roll and dramatically improves overall handling
* Laser cut from 3/16" steel & 2...



  SYN8002
Synergy Jeep JK Heavy Duty Chromoly Tie Rod
Our Price: $325.00

* Heavy duty tie rod for Jeep JK Wranglers
* Bent similar to factory bar to clear sway bar mounts
* Made from 1 3/8" 4130 Chromoly and Heat Treated for maximum strength - 2x (200%) stronger than stock tie rod
* Synergy Suspension Double Adjuster Sleeve: allows adjustment of tie rod length without removing it from the vehicle
* Strongest Jeep JK Tie Rod on the...



  SYN8009-12-01
Synergy Jeep JK Heavy Duty Front Ball Joint Set (1 Upper, 1 Lower)
Our Price: $100.00

# Designed to replace the factory ball joint that is prone to premature failure on lifted Jeep JKs with large off-road tires
# Fully greasable sintered metal on bushing design that has high wear resistance
# Outperforms the factory ball joint assembly
# Ball joint boot is made from tear/wear resistant polyurethane
# Includes all necessary hardware for installation
# 12 Month Unlimited-Warranty...



  SYN8007
Synergy Jeep JK Heavy Duty Steering Stabilizer Relocation Bracket
Our Price: $45.00

* Synergy Suspension Jeep JK Fox/Synergy Suspension Steering Stabilizer Relocation Kit
* Designed to be used with or without Synergy Suspension Front Track Bar Bracket (PPM-8055 & PPM-8089)
* Designed to relocate a Fox/Synergy Suspension steering stabilizer up and out of harms way on a JK
* The kit includes grade 8 hardware and is easily installed using basic hand tools
* Manufactured from high strength 3/16"...



  SYN8001
Synergy Jeep JK High Steer Drag Link
Our Price: $175.00

* Synergy Suspension Jeep JK High Steer Drag Link for 2-Door & 4-Door Jeep JKs
* Includes a new tie rod end for the steering knuckle; reuses stock tie rod end on the pitman arm
* Fully adjustable without removing tie rod from axle or frame end
* Made from 1-3/8" .250 Wall DOM
* Suspension components feature an abrasive-resistant powder coat finish for maximum durability and...



  SYN4018
Synergy Jeep JK Onboard Air Compressor Bracket (Viair & ARB)
Our Price: $50.00

* Jeep JK air compressor bracket.
* Easy bolt on mount to supply a spot to mount an onboard air compressor under the hood of your JK.
* If you have seen under the hoods of a JK you will know that space to mount these compressors are slim.

Features:

* Designed for 2007 to 2010 Jeep JK Wrangler With stock or Hemi engine
* Works with VIAIR...



  SYN8003
Synergy Jeep JK Steering Stabilizer Tie Rod Clamp
Our Price: $50.00

Synergy Suspension Jeep JK Fox Steering Stabilizer Tie Rod Clamp

* CNC machined from 1020 DOM material
* Zinc plated from maximum corrosion resistance
* Compatible with the Synergy Suspension & Fox monotube steering stabilizers
* Designed to mount the factory and aftermarket style steering stabilizers on the factory JK tie rod (1.375" OD)
* 100% bolt on components assures an easy, trouble free installation...



  SYN8001-02-01
Synergy Jeep JK Tie Rod Flip Adapter
Our Price: $9.99

# Adapter is designed to flip the taper on the steering knuckle
# Eliminates the need for reaming the knuckle to the correct taper. Drill the existing taper with a 7/8" drill bit for installation
# CNC machined from 303 stainless steel
# Sold Individually...



  SYN5000
Synergy Jeep TJ/LJ Front Coilover Bracket Kit
Our Price: $400.00

* Improves Vehicle Driving Characteristics
* Increases Articulation
* Includes All Necessary Mounting Hardware
* Uses 2" Diameter, 12" or 14" Travel Emulsion/Remote Reservoir Shocks
* Also can be used with FOX 2.5" Air Shocks
* Uses Stock Bump Stops
* Compatible With Common On Board Air
* Compatible With Common Body and Engine Lifts
...



  SYN4003-10
Synergy Line Clamp Kits for -6 Race Hose
Our Price: $15.00

Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2"

* The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis, suspension links, or other tubular components
* The rubber Line Clamp Kits are designed to fit tightly around 1.5 to 2 tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines.
...



  SYN4003-03
Synergy Line Clamp Kits for 3/16" Std Brake Hard Lines
Our Price: $15.00

Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2"

* The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis, suspension links, or other tubular components
* The rubber Line Clamp Kits are designed to fit tightly around 1.5 to 2 tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines.
...



  SYN4003-09
Synergy Line Clamp Kits for 3/8" Automotive Lines
Our Price: $15.00

Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2"

* The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis, suspension links, or other tubular components
* The rubber Line Clamp Kits are designed to fit tightly around 1.5 to 2 tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines.
...



  SYN4003-11
Synergy Line Clamp Kits for 3/8" Hydraulic Hose
Our Price: $15.00

Synergy Suspension Line Clamp Kit with hose clamps for tubing size 1.5" to 2"

* The perfect solution for keeping your braided hoses, brake lines and wiring secure when mounting along tube chassis, suspension links, or other tubular components
* The rubber Line Clamp Kits are designed to fit tightly around 1.5 to 2 tubes and keep your lines: movement-free, from being pinched, frayed, or transferring unnecessary heat to other lines.
...



  SYN4023-875-625
Synergy Shock Soft Jaws - 0.625" & 0.875" Shafts
Our Price: $30.00

These aluminum Synergy Suspension Shock Soft Jaws securely hold the shock shaft and shock body in place in your vice.

Fits both 5/8" & 7/8" shafts....



  SYN3102
Synergy Suspension 3" Radius Flat Tab
Our Price: $5.00

* 3" radius tab for mounting to axles, 3" tube, etc.
* Designed for 9/16" Bolt
* Material: hot rolled steel
* Thickness: 1/4"...



  SYN5003
Synergy Suspension TJ/LJ Rear Coilover Extended Bracket Kit
Our Price: $300.00

* Improves Vehicle Driving Characteristics
* Increases Articulation
* Includes All Necessary Mounting Hardware
* Uses 2" Diameter, 12" or 14" Emulsion/Remote Reservoir Shocks
* Coil over shocks use a triple rate spring set up
* an also be used with FOX 2.5" Air Shocks
* Uses Stock Bump Stops
* Compatible With Common Body and Engine Lifts
...



  SYN4015
Synergy Suspension Universal Shock Spanner Wrench
Our Price: $30.00

* Designed for adjusting the spring retaining rings on 2.0" and 2.5" Fox, Sway-A-Way, King and FOA Coil Over Shocks
* Integrated pins allow for easy removal of the bearing cap for shaft/piston removal on Fox and King Shocks
* All-in-one wrench designed to reduce the amount of tools needed in your shock tuning toolbox
* Made from 1/4" 304 Stainless Steel...



  SYN3612-14-L
Synergy Threaded Weld-On Tube Adapter - 1.500" Tube ID, 1.25-12 Left Hand Thread
Our Price: $14.00

* Designed for use with several sizes of rod ends and tie rod ends
* CNC machined from alloy steel for easy weld-ability to common DOM material
* Available in several different sizes as well as right & left-hand thread...



  SYN3612-14-R
Synergy Threaded Weld-On Tube Adapter - 1.500" Tube ID, 1.25-12 Right Hand Thread
Our Price: $14.00

* Designed for use with several sizes of rod ends and tie rod ends
* CNC machined from alloy steel for easy weld-ability to common DOM material
* Available in several different sizes as well as right & left-hand thread...



  SYN5006-02
Synergy Universal 3-Link Frame Mount (2.625") Bracket Pair
Our Price: $235.00

* Universal 3-Link Frame Mount Bracket (Pair)
* High clearance lower link mounts are angled out at 10 degrees
* Upper link mount allows for a wide selection of mounting points when mounting the upper axle mount
* The brackets come with tabs that allow the upper link mount to be mounted on either side of the frame
* The brackets are designed to use any joint...



  SYN3105
Synergy Universal 3.0" Diameter, Radius Welded Shock Mount
Our Price: $25.00

* Weld on shock mount bracket
* Designed for any type of shock including coilovers and air shocks
* Laser cut and CNC bent from 3/16" carbon steel
* Hole size: 1/2"
* Mounting width: 1.5"
* Sold Individually...



  SYN5006-01
Synergy Universal 4-Link Frame Mount (2.625") Bracket Pair
Our Price: $265.00

* Universal 4-Link Frame Mount Bracket (Pair)
* High clearance lower link mounts are angled out at 10 degrees
* Upper link mount features 3 separate pick up points allowing for easy adjustment of the suspension geometry
* The brackets upper link mounts are angled at 25 degrees to meet at the top of the axle housing.
* The brackets are designed to use any joint with...



  SYN3109
Synergy Universal Axle Mount Track Bar Brackets - Crossover Steering
Our Price: $50.00

* Universal weld on track bar bracket designed for cross over, hysteer or normal steering alxes.
* Bracket can be trimmed to desired height to adjust the mounting position of the track bar to alighn the track bar and drag link in the same plane
* 9/16" through hole, 1.6" mounting width to match a PPM-4306 track bar bushing, JM12, JMX12, RSMX12T or KMX12 rod end with 3712-09-160 Heim Spacer
...



  SYN3116
Synergy Universal Axle Mount Track Bar Brackets - Standard Steering
Our Price: $40.00

Designed for 3 inch axle tube, 5/8 inch bore rod ends, FK HRSMX10 or HJMX10 rod ends....



  SYN3101-00-L
Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Left Side
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on an axle housing with a 3" diameter
* Link brackets are laser cut and CNC bent from 1/4" carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* The bracket is designed to be used with any...



  SYN3101-00-R
Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Right Side
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on an axle housing with a 3" diameter
* Link brackets are laser cut and CNC bent from 1/4" carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* The bracket is designed to be used with any...



  SYN3101-00-R/L
Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 0 Degree, Right/Left Side
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on an axle housing with a 3" diameter
* Link brackets are laser cut and CNC bent from 1/4" carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* The bracket is designed to be used with any...



  SYN3101-10-L
Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 10 Degree, Left Side
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on an axle housing with a 3" diameter
* Link brackets are laser cut and CNC bent from 1/4" carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* The bracket is designed to be used with any...



  SYN3101-10-R
Synergy Universal Radius Axle Link Bracket - For 3.0" Dia Tube, 10 Degree, Right Side
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on an axle housing with a 3" diameter
* Link brackets are laser cut and CNC bent from 1/4" carbon steel
* Heavy duty 3 sided construction provides for a VERY rigid bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* The bracket is designed to be used with any...



  SYN3214
Synergy Universal Shock Mounts - Flat Mount, No Radius, 1.50" Mount Width
Our Price: $8.00

* 1/2" Hole
* 3/16" Hot Rolled Steel
* Mounting widths available: 1.25" or 1.50"...



  SYN3213-175
Synergy Universal Shock Mounts - Parallel Bolt, 1.75" Radius, 1.50" Mount Width
Our Price: $8.00

* Flat Shock Tab
* Designed to mount tubing or axle housings etc
* 1/2" Hole
* 3/16" Hot Rolled Steel
* Bolt runs parallel with notch
* Mounting widths available: 1.25" or 1.50"...



  SYN3416-150
Synergy Universal Steering Column - Cut for 1.50" OD Tube
Our Price: $140.00

* Allows for easy adjustment of steering column
* Laser cut from 3/16" steel...



  SYN4501
Synergy Universal Tire Carrier Hinge, 1.75" Dia
Our Price: $135.00

* High grade trailer style spindle 1.25" Dia. or 1.75" Dia.
* Timken tapered roller bearings
* CNC machined bearing housing with high grade seal & cap
* The whole assembly is greaseable for life long performance...



  SYN3217
Synergy Universal Track Bar Frame Bracket (Un-welded)
Our Price: $40.00

* Un-welded Bracket (4 Pieces)
* Accepts 9/16" Bolt
* Mounting width: 2-5/8"
* Designed to work with Bushing Kit: Part #PPM-4305...



  SYN3103
Synergy Universal Upper Control Arm Axle Bracket (2.625") - 3" Tall, Flat Bottom
Our Price: $15.00

* Weld on link mount bracket
* Designed to be used on Diff Trusses or any flat mounting surface
* Strong, heavy duty bracket
* Hole size is 9/16"; mounting width is 2 5/8"
* 3" from center to top hole to bottom edge; can be trimmed to desired length
* The bracket is designed to be used with any of our large rod ends with our high misalignment spacers & all of our rebuildabe spherical bearing assemblies...



  SYN4111-5-45-H
Synergy Wheel Spacer - 4x4.5, 1.25" Thick - 87-06 YJ/TJ/LJ, 84-01 XJ/MJ, 93-98 ZJ, 02-Up KJ/KK
Our Price: $100.00

* Synergy Suspension Wheel Spacers
* Wheel hub & lug centric for increased strength
* CNC machined from billet 6061-T6 aluminum
* Features corrosion resistant red anodizing
* High grade wheel studs & lug nuts
* Can be used with factory or after market wheels
* Includes Loctite
* Sold in pairs...



  SYN4113-5-50-H
Synergy Wheel Spacer - 5x5, 1.75" Thick - 07-Up JK, 06-Up XJ, 99-Up WJ/WK
Our Price: $100.00

* Synergy Suspension Wheel Spacers
* Wheel hub & lug centric for increased strength
* CNC machined from billet 6061-T6 aluminum
* Features corrosion resistant red anodizing
* High grade wheel studs & lug nuts
* Can be used with factory or after market wheels
* Includes Loctite
* Sold in pairs...