Off Road Warehouse 4X4 Parts & Accessories - ORW

Call Us: (800) 341-7757 Contact Us

Cart

6″ RADIUS ARM LIFT KIT W/ FRONT DIRT LOGIC 4.0 RESI COILOVERS REAR DIRT LOGIC 2.25 SHOCKS

Fabtech

6" RAD ARM SYS W/ 4.0 & 2.25DL 2019-20 FORD F450/F550 4WD DIESEL (K2336DL)

$6,004.95

Item #: K2336DL

Quantity:

Out of Stock

Add to Cart

Add to Wishlist

Create a New List

true

Specifications

Item Specifications

Lift/Drop Height: 6 in.

Position: n/a

General

Brand: Fabtech

Item #: K2336DL

MSRP: $6,004.95

Description

2019-20 FORD F450/F550 4WD

Fabtech???s 6" Radius Arm lift kit for the Ford F450 and F550 Super Duty is built to handle the on and offroad demands of the truck enthusiast. This vehicle???s suspension is more robust than the Ford F250 and F350 and therefore demands specialty parts only available from Fabtech.

This Radius Arm system is a complete upgrade to the factory suspension and will provide additional strength for use with oversized tires. The design has been proven in over 10 years of service in consumer, commercial and military applications. High quality components with properly designed suspension geometry is what sets this system apart from all other Radius Arm suspensions.

Each Fabtech component has been designed with specific features and benefits that create this quality suspension system. For a greater understand of each these components please see below.

FEATURES

Fabtech Replacement Radius Arms

Dirt Logic 4.0 Resi Coilovers

Trac Bar Relocation Bracket

Sway Bar Drop Brackets

Pitman Arm

Rear Block & U-bolt Kit

RADIUS ARM

Tubular construction with dimple die side plate for superior strength. Arms are offset to allow for full turning radius of the Dana Super 60 front axle with wide tires. Fabtech Radius Arms have 1 degree of caster built in for the increased ride height. Adjustable alignment cams on the Arms allow for an additional 1.5-2 degrees of caster adjustment.

DIRT LOGIC 4.0 CONVERSION

Simplistic super stout 1/4??? thick steel brackets utilize the factory coil bucket to bolt in the big Dirt Logic 4.0 Coilover. A massive 4??? diameter stainless steel body with 1.25 NitroSteel?? piston rod for maximum corrosion resistance and durability for the most aggressive driving conditions. American made coil springs handle the weight of the F450 or F550 and provide a superior ride. The remote aluminum reservoir dissipates heat for continuous damping when driving over extreme terrain at high speed. The pinnacle of all coilover shocks.

TRACK BAR BRACKET

1/4??? thick steel bracketry re-positions the factory track bar to center the axle under the vehicle with the increased lift height. Super stout box style bracket is designed to eliminate deflection when the track bar moves through its full cycle.

DROPPED PITMAN ARM

Forged steel construction with high strength material that exceeds the factory specifications. Designed specifically for the F450 and F550 to work in conjunction with the factory drag link and Fabtech???s Track Bar bracket for proper steering functionality.

FRONT & REAR BUMP STOP BRACKETS

Heavy duty 1/4??? thick steel brackets control the travel eliminating over cycling of the suspension. Super strong construction can handle the full compression impact of the F450 or F550.

SWAY BAR BRACKETS

1/4??? thick steel drop brackets re-position the front sway bar for the increased ride height. This allows the sway bar link ends to fully cycle without binding throughout the extended travel range.

BRAKE LINE BRACKETS

Re-positions the factory brake lines down on the frame for the new travel range without having to open the brake system. Keeps factory fluid system intact.

STEERING STABILIZER BRACKETS

Retains the factory F450 or F550 long travel steering stabilizer with a 1/4??? thick steel bracket and support brace to help reduce tire shimmy.

REAR LIFT BLOCKS

Steel rear lift blocks replaces the factory blocks for additional lift without changing the ride quality or load carrying capacity.

REAR U-BOLTS

American made U-Bolts designed to attach the entire rear differential to the vehicle. A critical part that demands the best quality for your vehicle.

DIRT LOGIC 2.25 SHOCKS

Constructed of a stainless steel body with NitroSteel?? piston rod for maximum corrosion resistance and durability. Superior ride quality both on and offroad. Excellent damping for offroad use.

PART NUMBERS

OTY	PART #	DESCRIPTION
1	FTS22311	COMPONENT BOX
1	FTS22274	REAR BLOCK KIT
1	FTS835235D	FRONT DIRT LOGIC 4.0 RESI COILOVER [DRIVER]
1	FTS835235P	FRONT DIRT LOGIC 4.0 RESI COILOVER [PASSENGER]
2	FTS810052	REAR DIRT LOGIC 2.25 SHOCK

Additional Information

INCLUDED SHOCKS

FRONT DIRT LOGIC 4.0 RESI COILOVER

The Dirt Logic 4.0 provides the ultimate in hardcore offroad dampening capacity with superior highway comfort in a big package. This massive high end shock is designed for full size vehicles that required the biggest and best Coilover shock in a bolt on configuration. Nothing else comes close.

4.0??? OD Stainless Steel Body
3 5/8??? OD Billet Aluminum Piston
1 1/4??? NitroSteel?? Black Piston Rod
Adjustable Coilover Construction
3/4??? Spherical Ball Mounting Ends
4.0??? OD Aluminum Resi

REAR DIRT LOGIC 2.25 SHOCK

Dirt Logic 2.25???s are designed to replace factory shocks with a larger, more robust configuration. The 2.25 size is what separates it from other replacement take apart shocks for a superior ride, both on and off road. Shocks are pretuned for each Fabtech suspension, accounting for larger tires, providing the finest all around damping.

2.25??? OD Stainless Steel Body
2.0??? OD Billet Aluminum Piston
7/8??? NitroSteel?? Black Piston Rod
Polyurethane Mounting Ends

DONATE $1 TO KEEP TRAILS OPEN

Customer Reviews

Share your thoughts with other customers
Login to leave a review

Attachments

FT22257i

Return Policy

RETURNS & EXCHANGES

All returns must be accompanied by an original or copy of the receipt within 30 days. There are no refunds/credits after 30 days. Electrical items, tools, installed parts, and some special order items are non-refundable/non-returnable.

All items returned are subject to a minimum 15% restock fee unless other arrangements were made at the time of purchase.

Shipping charges will not be refunded unless item was received damaged or defective, or an error was made on our part when processing your order. Please contact us for any further questions on non-returnable items.

In order to return any products you must contact our customer service at 1-800-341-7757 and obtain an RGA number and write it large and clear on the box being returned. Also care must be taken by you the customer to pack the returned merchandise carefully so that it does not get damaged when sent back to us. Off Road Warehouse is not responsible for any damage that occurs during shipment back to us and the product will become non-returnable if it becomes damaged during the return shipment.

DAMAGED OR DEFECTIVE MERCHANDISE

Any customer that receives damaged or defective merchandise should contact Off Road Warehouse immediately and at the latest within 30 days of the Invoice/Purchase date.

Please contact the Customer Service line at 1-800-341-7757 for more information on returning the merchandise to us and how long it will take to receive a replacement.

Off Road Warehouse does its best to make sure that all merchandise is free of defects and is shipped safely but accidents in shipping and transportation as well as manufacturing defects do happen. We will be happy to help you out and get you new merchandise as quickly as possible.

Order Cancelations

Order Cancelations are not guaranteed. Orders are processed once they are received, In some cases these are with third party vendors and manufactors. We will do everything in our power to stop an Order already in motion but sometimes we are unable to do so.

If you request a cancellation, we will confirm the order is canceled prior to issuing a refund. If your order is not able to be canceled, you must follow the Return Policy Guidelines outlined above.

WARNING