2010-14 FORD F150 RAPTOR 4WD - FITS 4 LIFTS
This system is ideal for the Raptor enthusiast that has outgrown the capabilities of the stock shocks and wants increased damping with suspension reliability for aggressive offroad use.
Fabtechs Billet Aluminum Upper Control Arms replace the factory weak ball joint arms for severe offroad use with superior construction and awesome looks. The Billet UCA feature 1.25 Stainless Uniballs and 3/4" heims at the frame for rock solid suspension performance.
The Dirt Logic 3.0 Coilovers are a perfect match to the billet arms. They will provide 11 of wheel travel with the ability to adjust the compression damping by the twist of a knob on the remote reservoir.
The rear suspension receives Dirt Logic 3.0 Bypass shocks that will allow 12 of wheel travel with the stock leaf springs. The triple tube bypass adjusters provide infinite adjustability in both rebound and compression. It is the ultimate in shock control for the rear of your Raptor.
This system is built to the standard of Fabtechs legendary race components for unsurpassed strength and longevity. It is the single biggest suspension upgrade you can make to your Raptor that you feel both on and offroad.
FRONT DIRT LOGIC 3.0 RESI COILOVER
These race quality Coilovers directly replace the stock Raptor Coilovers with improved offroad damping for aggressive driving in the most punishing conditions. They provide an additional 10% of wheel travel for a total of 11 when used with uniball upper control arms.
The Dirt Logic 3.0 shocks are constructed with a steel body and finished in a tactical black Cerakote coating for extreme durability. This coating provides 120 hour salt spray compared to zinc plated shocks only going 48 hour salt spray. NitroSteel 1-1/4" piston rods are utilized to repel rock chipping while providing superior corrosion resistance.
The cold wound Eibach coil springs have a 600lb. spring rate to properly hold the weight of the Gen 1 Raptor. They work perfectly with the proprietary valving of the Dirt Logic 3.0 Coilovers for high speed offroad use.
The remote 2.5 reservoir features a compression adjuster that allows increased damping for aggressive driving. The reservoir is mounted to the side of the frame allowing access to the large twist knob for fast and easy adjustments to the compression valving.
High tolerance internal components feature Viton seals and a 2.75 OD billet piston with variable flow bleed ports. It provides a compliant ride at low speed yet able to handle big impact hits with ease.
Completing the blacked out appearance of these Raptor Coilovers is the polished and black anodized aluminum components. They offset the matte Cerakote finish for a subtle yet bold statement.
These Dirt Logic 3.0 Coilovers are an upgrade in quality and performance from the stock Raptor shocks that will be appreciated once behind the wheel in rugged offroad conditions.
FEATURES: 3.0" OD Steel Body with Cerakote Finish 120 Hour Salt Spray 2.75" OD Billet Aluminum Piston 1-1/4" OD NitroSteel Black Piston Rod Viton Seals Exotic Valve Stack 600lb. Eibach Coil Springs 2.5" OD Aluminum Resi w/ Compression Adjuster 5/8" Upper Spherical Ball Mounting Ends 7/8" Lower Spherical Ball Mounting Ends
REAR DIRT LOGIC 3.0 BYPASS SHOCK
The factory rear Raptor shocks have something less than desired when it comes to damping in aggressive offroad conditions. Dirt Logic 3.0 Bypass shocks will improve the ride quality of the rear suspension for aggressive offroad driving along with a compliant highway ride.
These Raptor Bypass shocks feature a 3 tube construction that provides two adjustments for compression and one for rebound. The tubes have been precisely placed on the body to provide superior damping throughout the travel range.
Each Bypass tube adjuster comes preset from hours of testing for the best overall performance. This eliminates the need to spend time adjusting on your first drive. Just bolt them on and go hit the trail.
The 2.5 OD piggyback reservoir provides additional cooling to help reduce fade during high speed offroad use.
Each bypass tubes and reservoir port are meticulously TIG welded to the 3.0 steel body. The body is then pressure tested, honed and coated with a Cerakote finish in tactical black for extreme durability. This coating provides 120 hour salt spray compared to zinc plated steel shocks only going 48 hour salt spray.
NitroSteel 7/8" piston rods are utilized for maximum corrosion resistance. A durable piston rod boot is included to totally protect the rod from sand and rock spray that can cause damage leading to seal failure.
High tolerance internal components feature Viton seals and a 2.75" OD billet piston with variable flow bleed ports. It provides a compliant ride at low speed yet be able to handle big impact hits with ease.
Completing the blacked out appearance of these Raptor Coilovers is the polished and black anodized aluminum components. They offset the matte Cerakote finish for a subtle yet bold statement.
These Dirt Logic 3.0 Bypass shocks are the pinnacle of shock performance for the most aggressive offroad conditions.
FEATURES: 3.0" Black Cerakote Body 120 Hour Salt Spray 3 Tube design with 2 compression and 1 rebound Allows for 12" of wheel travel with stock leaf springs 2.75" OD Billet Aluminum Piston 7/8" OD NitroSteel Black Piston Rod Viton Seals Exotic Valve Stack 2.5" OD Piggyback Resi 5/8" Spherical Ball Mounting Ends