Supertop for Truck (76303-35)

It does what it needs to but I'm disappointed that it arrived damaged

Update; first rain and the top leaks like a sieve from the roof seams corners and front seal. Very disappointed to have spent this kind of money and have it leak this bad and all while sitting in the driveway. To start with the quality control seems non existent and directions lack important details and should be rewritten to include real photographs. None of the part number stickers were correct for the bows. My order arrived in a beat up and retapped box. I received two passenger side front bows and the driver rear bow was assembled incorrectly. I had to hunt down the replacement parts to complete the installation. One of the biggest complaints I see online is how hard it is to clip the rear corners down. This is easily overcome with a ratchet strap to pull the rear bow down. The zippers take some finessing to get started. The side panels zip closed fairly easy while the rear is hard to close the zipper because of the orientation of the zipper being sewn in. There are a few gaps in the corners that will need additional weatherstripping to keep the water out. The top on my 2008 super duty sits toward the inside of the bed leaving a large flat surface between the top and outside of the bed. The top sits fairly tight with minimal wrinkles. Bestop used to stand for quality but I sadly feel there seems to be little of it anymore.

I am happy with the product but install can be challenging. Im hoping it is because I was trying to install it in the cold, but the fabric was very tight. there are parts of the top that are still too tight to close correctly, which I am hoping resolves itself on the next warm day. in order to tension the hoop closest to rear window I had to lay in the truck in press with my legs almost as hard as possible and the hoop then just made the first tensioning notch. I cant imagine it is designed to be this challenging. I was certain the stitching was going to fail due to the 300+ pounds of pressure I put into the frame. I have had other similar tops before including my 99 wrangler softop and they were not even remotely this difficult. it does look better than I thought. Im hoping the stitching doesnt pop from the tension though.

There was leaking on the front corners and the back window.