TeraFlex Alpine CT (Cross-Trail) Suspension Systems build on our Sport ST (Street and Trail) Suspension Systems. The 2.5 inch Alpine CT2 Short Arm Suspension System was designed for the enthusiast who wants to fine tune their suspension.
Alpine Short Control Arms allow tuning of the caster and pinon angles, centering of the axles in the wheel wells, and wheelbase adjustment. The zero-maintenance adjustable control arms make the Alpine CT2 the perfect all-around suspension system.
Our adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angles, anti-squat geometry, and tire position on vehicles with 0-4.5 inch lifts. The adjustable Alpine IR Front Track Bar and Front (3.5 inch and up) and Rear Track Bar Brackets improve steering response, center the axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling.
This results in improved suspension geometry and relaxed control arm angles for a superior ride quality and performance regardless of terrain. These systems restore front and rear roll axis angles to minimize brake dive and acceleration squat.
TeraFlex suspension systems provide reduced noise, vibration, and harshness (NVH). Alpine CT Suspension Systems are engineered for hardcore Jeeping without sacrificing weekday ride comfort!
Does not include shocks. We recommend Falcon Performance Shocks. Falcon shock absorbers and TeraFlex lift coil springs have been engineered together to improve both compression and rebound for optimal vehicle stability. Alpine CT Suspension Systems are offered with select Falcon SP2 Mode Adjust Shocks including: 3.3 Fast Adjust, 3.1 Piggyback, or without shock absorbers. Other Falcon shocks are available separately.
Specs:
- JT Gladiator (pickup)
- Lift Height: 2.5 inch
Max Tire Diameter:
- Sport/Overland Fenders: 35 inch Tires
- Rubicon Fenders: 35 inch Tires
Includes:
- 2.5 inch Lift Coil Spring Kit - Front (part number 1872100)
- 0.5 inch Lift Coil Spring Spacer Kit - Rear
- Alpine Short Control Arm Kit - 8-Arm (0-4.5 inch Lift) (part number 1417500)
- Alpine IR Front Track Bar (0-6 inch Lift) (part number 1753420)
- Progressive Bump Stop Kit - Front and Rear (0-4.5 inch Lift) (part number 1969200)
- 2 inch Bump Stop Strike Pad Extensions - Front Lower - 2
- 0.5 inch Bump Stop Strike Pad Shim Kit - Rear Lower (part number 1969100) x 2
- Front Sway Bar Quick Disconnect Kit (0-4.5 inch Lift) (part number 1764000)
- 13 inch Rear Sway Bar Link Kit
- Front Brake Line Anchor Kit (part number 1101255)
- All necessary hardware
- And more
Features and Benefits:
- Alpine CT2:
- Sport/Overland Fenders: 35 inch Tires
- Rubicon Fenders: 35 inch Tires
- CT Short Arm Suspension Systems:
- Adjustable Alpine Short Control Arms balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 0-4.5 inch lift kits
- Alpine Short Control Arms are constructed from durable 42mm x 4mm wall DOM tube for maximum strength
- Bolts to the factory control arm mounting brackets
- Cross-Trail:
- Delivers true Cross-Trail (CT) performance
- Dependable performance w/ zero worries
- Positive, responsive handling w/ reduced NVH
- High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality.
- Adjustable Alpine IR Front Track Bar and Front Track Bar Bracket (3.5 inch and up) improve steering response, center axles to optimize vehicle roll center, and reduce body roll for unsurpassed handling
- Front and rear Progressive Bump Stops provide progressive compression during high-speed suspension movement
- Full range of movement for off-road flex and articulation
- Install and drive simple bolt-on installation - no welding required
- TeraFlex Limited Lifetime Warranty against defects
Note(s):
- Requires aftermarket wheels w/ 4.75 inch backspacing or less - or Offset Wheel Adapters (part number 1057000) for stock wheels - not included.
- Models w/ plastic bumpers require removal of bumper-to-fender wind deflector/splash guards in order to fit 35 inch or larger tires.
- All OEM fenders require 2 inch front and 1 inch rear bump stop extensions in order to fit 35 inch tires - included.
- Alignment required.
- Requires longer shocks (not included in base kit) - Falcon Performance Shocks recommended.
- Install Time: 10 Hours