As advertised great communication fast shipping would recommend

Toyota 4Runner 2017, not bad for the price, the only thing I had to change was one of the screws and the nut that was giving me problems, nothing serious, I spent $3 IN ACE

At first I received wrong item but customer service was fast and was able to return and receive right product. A+ customer service, with no issues. All parts were complete without any missing bolts.

About a 2.5-3' lift in the rear. Bilstien 5100's were bottoming out some on speed bumps bc they are rated for 2"". These tightened up the rear enough that they are no longer bottoming out.Install was fine. Bolts to sway bar was a tight fit. But you can thread them into the sway bar with a socket and they will go in. Lube up the bushings and take a hammer to tap them into the linkages.Adding bigger bump stops is a good idea too.

Missing parts

You need to include 4 cupped washers for the bottom nylon bushings and 2 Nylon insert nuts for the top posts.

El primer momento no llegó completo pero al instante del reclamo hicieron el envío de lo q faltaba quede conforme gran producto

So it fits. With modifications. The mounting bolt connecting to the actual sway bars OD was the same as the ID of the sway bar. The 5th gen also uses 3 washers, not two from the factory. The bushings were similar enough in size the I felt comfortable recycling 1 oem washer on each side (middle.) I did have to drill them out with a 3/8 drill bit for it to fit the extension. This kit brought my extension angle back pretty close to stock. I notice no difference in ride quality or body roll compared to stock. I'm using this with a icon stage 3 and HD rear springs so probably close to 4"" lift in the rear

Received the end links today. They look to be well built with urethane bushings. However, the seller provided one coarse thread nut and one fine thread nut, instead of two fine thread nuts. (See attached photo and note the delta in thread pitch) I live overseas, so I bought the proper nut locally in the interest of time. I recommend the seller check their inventory to verify this issue is not present in the rest of their products.

Good value. Install was easy. The bushings do have to be pressed in, but if you have a cork screw press or hydraulic press, it's not hard. After lifting my car, these extended sway bar links give a softer ride and more travel than stock sway bar links do.

Was missing a bolt upon arrival. Company offered a $10 discount, or offered for me to ship back and get sent a new kit. I felt this was reasonable.