Rock Assault 3.0L V6 Power Steering Pump Kit. We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around 1 ...

Rock Assault Steering Pump Upgrade Kit. The stock Toyota pump is just barely able to supply the volume and pressure needed to run Hydraulic assist steering. The stock pump puts out 1,300 PSI at only one gallon per minute. The stock pump is not able to provide enough fluid to run both the stock stee

1,650 PSI Power Steering Pump. This TC style power steering pump is the best of the best. It features an all aluminum housing to handle extreme heat and puts out an amazing 4.5 GPM of flow and 1,650PSI of pressure. The anodized aluminum pulley on this pump is designed to fit Toyota applications and

1,650 PSI Power Steering Pump. This TC style power steering pump is the best of the best. It features an all aluminum housing to handle extreme heat and puts out an amazing 4.5 GPM of flow and 1,650PSI of pressure. The anodized aluminum pulley on this pump is designed to fit Toyota applications and

Rock Assault 3.0L V6 Power Steering Pump Kit. We all know that the stock pump on a 3.0 is just not enough to turn big tires or run a ram assist and when you try and drill out the inlet to get more volume the result is a loud pump followed by pump failure. A new Toyota stock pump puts out around ...

Our popular Sidekick/Tracker Power Steering Kit is now available for Samurais with 1.6L 8-valve and 16-valve engines. After a long day of driving your arms will take a beating with the Samurai manual steering. Power steering is often listed as the most favorite modification Samurai owners have ev

The Trail-Gear Power Flow 1650 psi Power Steering Pump has been designed and engineered to provide ultimate performance in hydraulic ram steering applications. It is a direct replacement for TC and CB style pumps. The body of the pump is constructed of steel to increase reliability and decrease w

Tacoma Rock Assault Power Steering Kit. After you have completed the solid axle swap on your 1995-2004 Tacoma, you will need to upgrade your power steering pump so that you can turn those big tires on the trail. The stock pump works well enough for the stock IFS and stock tires, but once you put

PS Pump with Serpentine Pulley 1650PSI. Trail-Gear's new Power Flow 1650 psi pump has been designed and engineered to provide ultimate performance. The body of the pump is constructed of steel to increase reliability and decrease wear. It is also equipped with oversized bushings for high H.P. ...

Tacoma Power Steering Hose Conversion Kits. When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 1986-1995 Toyota IFS power steering box. Trail-Gear has developed a power steering hose conversion kit that will allow you to remove your rack an

Our popular Sidekick/Tracker Power Steering Kit is now available for Samurais with 1.6L 8-valve and 16-valve engines. After a long day of driving your arms will take a beating with the Samurai manual steering. Power steering is often listed as the most favorite modification Samurai owners have ev

Our popular Sidekick/Tracker Power Steering Kit is now available for Samurais with 1.6L 8-valve and 16-valve engines. After a long day of driving your arms will take a beating with the Samurai manual steering. Power steering is often listed as the most favorite modification Samurai owners have ev

Machined from 6061-T6 billet aluminum with a brushed and textured surface and clear anodized finish, these caps are the perfect dress-up accessory for showing off what's under your Jeep's hood. Features: Power Steering Cap Material: Billet Aluminum Color: Silver Sold As: Each Fits: ...

High Pressure Number 6 JIC Fittings These number 6 JIC female fittings are perfect for any steering application. These fittings are made out of zinc-plated steel and will fit a number 6 high pressure power steering hose. Easy screw-on installation with no crimping required. Specs: Warranty: 12

High Pressure Number 6 JIC Fittings These number 6 JIC female fittings are perfect for any steering application. These fittings are made out of zinc-plated steel and will fit a number 6 high pressure power steering hose. Easy screw-on installation with no crimping required. Specs: Warranty: 12

Power Steering High Pressure Hose Number 6 high pressure power steering hose with a rated working pressure of 2250 psi and a minimum bursting pressure of 9000 psi. These hoses are made out of black oil-resistant high-temperature NBR rubber that is reinforced with high-tensile steel wire over a poly

Tacoma Power Steering Hose Conversion Kits. When installing a SAS kit on your Tacoma, the rack and pinion has to be removed and replaced, usually with an 1986-1995 Toyota IFS power steering box. Trail-Gear has developed a power steering hose conversion kit that will allow you to remove your rack an

Tacoma Rock Assault Power Steering Kit. After you have completed the solid axle swap on your 1995-2004 Tacoma, you will need to upgrade your power steering pump so that you can turn those big tires on the trail. The stock pump works well enough for the stock IFS and stock tires, but once you put

Replacement Pillow Block Steering Box Bearing for Synergy 94-18 4x4 Dodge Steering Box Braces Fits: 8557-04, 8558-04, 8559-04 ...

When installing a high flow pump on your vehicle it is important to use a larger reservoir to provide enough fluid when the system demands it. An OEM Toyota or Suzuki reservoir is fine for stock power steering pumps but inadequate for aftermarket TC style pumps. Trail-Gear Machined Power Steering

Tacoma Full Hydraulic Steering Kit. Full Hydraulic steering kits for 1995-2004 Toyota Tacomas are now available from Trail-Gear. This kit uses all of our trail tested full hydraulic components designed to fit on 2.7L and 3.4L applications. All mounting brackets are included and have been specific

High Pressure Number 6 JIC Fittings. These number 6 JIC female fittings are perfect for any steering application. These fittings are made out of zinc-plated steel and will fit a number 6 high pressure power steering hose. Easy screw-on installation with no crimping required. Available in a straig

Power Steering High Pressure Hose Number 6 high pressure power steering hose with a rated working pressure of 2250 psi and a minimum bursting pressure of 9000 psi. These hoses are made out of black oil-resistant high-temperature NBR rubber that is reinforced with high-tensile steel wire over a poly

Power Flow Steering Pump Rebuild Kit Power steering pumps in racing, rock crawling and off-road applications undergo way more stress than those used under normal conditions. However long it takes, eventually your Power Flow pump may be out of warranty and need to be rebuilt. More often than not,

Toyota Full Hydraulic Steering Kit Trail-Gear is proud to bring you the first complete Toyota Full Hydraulic Steering Kit. This kit comes with everything needed to build a fully hydraulic steering system. All mounting brackets are included and have been specifically designed for Toyota applications

Toyota Full Hydraulic Steering Kit. Trail-Gear is proud to bring you the first complete Toyota Full Hydraulic Steering Kit. This kit comes with everything needed to build a fully hydraulic steering system. All mounting brackets are included and have been specifically designed for Toyota application

Tacoma Full Hydraulic Steering Kit. Full Hydraulic steering kits for 1995-2004 Toyota Tacomas are now available from Trail-Gear. This kit uses all of our trail tested full hydraulic components designed to fit on 2.7L and 3.4L applications. All mounting brackets are included and have been specifical

Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 10-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) ...

Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 6-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) ...

Trail-Gear's Universal Full Hydraulic Steering Kit starts with a double-ended ram and clevis kit in your choice of size - 6-inch, 8-inch, or 10-inch. In addition, the complete kit also includes: Universal Full Hydraulic Steering Kit - 8-inch Ram (1) Orbital (100ml, 125ml, or 160ml) (1) ...

Trail-Gear's Universal Heavy Duty Full Hydraulic Steering Kit starts with a heavy-duty double-ended (2.5 inch bore x 1.375 inch rod) ram and clevis kit in your choice of size - 8-inch, 8.75-inch, or 10-inch. In addition, the complete kit also includes: Universal Heavy Duty Full Hydraulic ...

Trail-Gear's Universal Heavy Duty Full Hydraulic Steering Kit starts with a heavy-duty double-ended (2.5 inch bore x 1.375 inch rod) ram and clevis kit in your choice of size - 8-inch, 8.75-inch, or 10-inch. In addition, the complete kit also includes: Universal Heavy Duty Full Hydraulic ...