$$23.99In stockRace \ Fluids & Solvents1012B
1012B
BLACK STAINLESS STEEL POLYURETHANE COATING 14OZ CAN
Comprised of STEEL-IT Polyurethane #1002 applied over STEEL-IT Weathering Primer #2203, the system adheres to surfaces aggressively, and is ideal for protecting structural steel and other metals.These single component coatings require no complicated mixing. Applied as they come from the can, they are air dried and require no baking or heating ...
Steel-ItBLACK STAINLESS STEEL POLYURETHANE COATING 14OZ CA

Steel-It

BLACK STAINLESS STEEL POLYURETHANE COATING 14OZ CAN

$23.99 Original Price: $26.39

Item #: 1012B

Quantity:
Add to Cart
Add to Wishlist
  • Create a New List
Specifications
General
Brand
Steel-It
Item #
1012B
Dimensions (L/W/H)
6x6x6
Weight
1 lbs
MSRP
$26.39
Description
Comprised of STEEL-IT Polyurethane #1002 applied over STEEL-IT Weathering Primer #2203, the system adheres to surfaces aggressively, and is ideal for protecting structural steel and other metals.These single component coatings require no complicated mixing. Applied as they come from the can, they are air dried and require no baking or heating.USDA-approved for use in the food processing and handling industry where incidental food contact may occur, STEEL-IT Polyurethane #1002 blends polyurethane resin with Type 316L stainless steel leafing pigment to produce a rugged, non-toxic, satiny Black metallic finish. STEEL-IT Primer #2203 combines a modified alkyd resin, selected silicates, and iron oxides with Type 316L leafing pigment to produce a long-lasting primer for structural steel and other metals requiring good rust-inhibiting qualities.
The STEEL-IT Polyurethane Coating System features a unique stainless steel leafing pigment, and provides optimum weather-, abrasion-, and corrosion-resistance in general maintenance applications. The easy to apply system yields a hard, non-toxic,Black metallic finish that protects a multitude of metallic and non-metallic surfaces from ultraviolet rays, chemicals, oils, alkalis, food acids, water immersion, abrasion, and high-pressure washdowns.
  • Protects Steel from:
  • Severe atmospheric environments
  • Abrasion and impact
  • Water (fresh and salt)
  • High pressure wash downs
  • Uses:
  • Structural steel, food processing and packaging equipment
  • Industrial equipment metal parts, air conditioning, refrigeration equipment, etc.
  • Maintenance of trucks, auto parts, trailers
  • Bridges, tanks, towers
Additional Information
Surface Preparation: General use in light atmospheric service: Hand or power tool clean (SSPC-SP-2 and -3) after thoroughly removing all oils, salts and other contaminants. Heavy Duty Service: Sandblast to an SSPC-SP-6 (commercial blast) Anchor pattern should be cut and angular (1.5-2.0 mils deep). Film Thickness: General use: 1 coat of #2203 (3.0 dry mils) 1 coat of #1002 (3.0 dry mils minimum) Heavy Duty use: 1 coat of #2203 (3.0 dry mils) 2 coats of #1002 (3.0 dry mils per coat) Film thickness on blasted surfaces should be measured up from the peaks of the anchor pattern. Application: Conventional spray techniques use a Binks #62 Gun with a 68PB Air Cap and a 66 Fluid Tip or similar equipment. Airless application use a DeVilbiss JGB-501 airless gun combination with a fluid tip orifice between 0.015 and 0.021. Pump ratio should be at least 28:1 or other compatible combinations. Drying Time: #2203 Primer is a fast drying material that is touch dry in 1 hour and should be recoated between 4 and 24 hours. #1002 is dry to touch in 2 hours and should be recoated within 24 hours. The finished system can be put into light service in 36 hours. The system will continue to cure to maximum hardness and protection for 5-10 days. Coverage: #2203 Red Primer: theoretical coverage - 200 sq. ft./gallon at 3.0 dry mil. #1002 Finish: theoretical coverage - 150 sq. ft./gallon at 3.0 dry mil. In practice these values will be reduced at least 25% by loss factors. Limitations: Apply only when surface and ambient temperatures are above 40° F Relative humidity must be less than 86%. Surface temperature must be at least 5° F above dew point. Recommended for Surfaces where operating temperatures will not exceed 200° F.
TEASoftware