These are fitted with 5100 Bilstein set on the lowest setting and with 1/4"" spacer on driver-side to compensate for the lean. I never measured my OEM height but my current height, after 200 miles, with 17"" OEM wheels and 265 70 R15 AT tires is 36 1/4"" on driver-side; and 36 1/2"" on passenger-side. This is about 3/4"" higher than what I had with 5100's set on the highest setting with OEM springs. I expect the springs to settle another quarter inch or so. I have a 3/8"" spacer I can later replace the 1/4"" spacer to even out the height more equally. Ride is a bit smoother. I didn't have to separate the ball joints to install, only the tie rod and sway bar.Note that the pic is wrong. My springs have 11 'rings'; the pic shows 9. Also, one spring was an 1/8th taller than the other. I installed this one on the driver-side, along with the 1/4"" 'leaning' spacer and the driver-side still sits lower.